Must Have               : Cisco CCNP/CCDP, TCP/IP , VLAN, VRF, HSRP, Port Security, Traffic Shaping, Priority Queuing, Class of Service (CoS) , Sniffers, Wireshark, and Solarwinds

Skill set:

•             Direct engineering and design experience in the telecommunications and/or networking industry and/or B2B Internet Space. Cisco CCNP/CCDP or CCIE certifications preferred.

•             Understanding of transport protocols, routing protocols, and security/authentication protocols at all layers of the OSI model with emphasis on TCP/IP are essential.

•             Subject Matter Expert in IP protocols including BGP, EIGRP, OSPF, IP Multicast, MPLS Proficiency working with VLAN, VRF, HSRP, Port Security, Traffic Shaping, Priority Queuing, Class of Service (CoS)

•             Advanced knowledge of enterprise wireless architectures (design, implementation & troubleshooting)

•             In depth experience with multiple vendor¹s hardware, including Cisco, Mikrotik, Juniper, Aerohive etc.

•             Must have knowledge of networking features and protocols such as spanning tree, ARP, CDP, EIGRP, RIP, OSPF, BGP, VTP, Etherchannel, 802.1Q trunking, MLS, HSRP, QoS, multicast, 802.11, IPsec, Frame Relay,   

              RADIUS/TACACS+, SNMP, T-1/E-1, BRI/PRI, MPLS, dial-up services, and caching services.

•             Experience with network management tools such as Sniffers, Wireshark, and Solarwinds etc.

•             Experience supporting Windows and UNIX products systems/applications on networking technologies. * Ability to learn new things quickly, and need minimal direction.

•             A high degree of creative ability, analytical and technical skills and independent judgment/decision making.

•             Good strategic planning, project management, organizational and time management skills to handle multiple complex enterprise-scale complex projects simultaneously.

•             Excellent communications and presentation skills and candidate must have the ability to communicate with internal/external customers, vendors, management etc. in both formal and informal situations.

•             Strong interpersonal skills needed to team well with peers, customers, project managers, and vendor

•             Experience in network automation technologies such as ansible, python etc. would be an add on; not mandatory.

CHECK BEFORE YOU APPLY :

• Must be eligible to work in the UK/EU and no sponsorship will be provided.
• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on jobs@beatmysalary.com  or Whatsapp on +44 7940272803 or call us on +44(0)2032898811

Job Description:

1. Work in Quality Clinic supporting the Quality Engineers in Admin activities.
2. Update various trackers to keep the manufacturing part`s status updated Right First Time.
3. Software knowledge: SAP for materials management, MS-Excel.
4. Coordinate with cross functional teams and take actions as per there decision.
5. Ensure compliance with all relevant standards of documentation.
6. Ensure task completion milestones and timelines.
7. Willing to work in a dynamic situation.
8. Willing to work in Morning, Afternoon and Night shifts on two week rotation.
9. Hiring Type- Contract

• Define or review the Concept, Functional Requirements, Software Requirements and Test Specification;
• Support technically the Procurement department in the design and definition of the ATP systems supplied by third parties (internal and external);
• Give the necessary input for System Schematics and Bill of Material for all the ATP subsystems;
• Define and develop the appropriate technical solutions to integrate the ATP system fulfilling the international requirements in force (UNISIG) and the specific customer requirements (public and private operators);
• Design the electrical, mechanical, SW and HW interfaces between ATP system and vehicle.
• Provide input to the safety, reliability and maintenance requirements;
• Support and when necessary participate in the ATP-vehicle integration tests in field and the country specific authorization processes;

• Languages: Proficient level of English is required
• University or College Degree in Electrical; Mechanical or Electronics Engineering, Telecommunication Engineering or Computer science is highly desirable
• Rail industry background is mandatory
• Experience in the development and integration of control systems in railway industry is considered an asset
• Design and integration of on board Automatic Train Protection systems is also highly desirable
• Knowledge of ERTMS/ETCS highly preferred
• Team player, autonomous and solution-oriented
• Good communication and technical writing skills with ability to work in a multidisciplinary and international environment.

• Must be eligible to work in UK/EU and no sponsorship will be provided.
• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on jobs@beatmysalary.com  or call us on +44(0)2032898811

• Define or review the Concept, Functional Requirements, Software Requirements and Test Specification;
• Support technically the Procurement department in the design and definition of the ATP systems supplied by third parties (internal and external);
• Give the necessary input for System Schematics and Bill of Material for all the ATP subsystems;
• Define and develop the appropriate technical solutions to integrate the ATP system fulfilling the international requirements in force (UNISIG) and the specific customer requirements (public and private operators);
• Design the electrical, mechanical, SW and HW interfaces between ATP system and vehicle.
• Provide input to the safety, reliability and maintenance requirements;
• Support and when necessary participate in the ATP-vehicle integration tests in field and the country specific authorization processes;

• Languages: Proficient level of English is required
• University or College Degree in Electrical; Mechanical or Electronics Engineering, Telecommunication Engineering or Computer science is highly desirable
• Rail industry background is mandatory
• Experience in the development and integration of control systems in railway industry is considered an asset
• Design and integration of on board Automatic Train Protection systems is also highly desirable
• Knowledge of ERTMS/ETCS highly preferred
• Team player, autonomous and solution-oriented
• Good communication and technical writing skills with ability to work in a multidisciplinary and international environment.

• Must be eligible to work in UK/EU and no sponsorship will be provided.
• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on jobs@beatmysalary.com  or call us on +44(0)2032898811

Domain Expertise:

• Safety Plan and DIA 
• ISO26262 assessments 
• Functional Safety Release Recommendations 
• Safety Cases   

 Responsibilities:

• Responsible for setting principles, framework, processes and measures to release an item free from unreasonable risk when operated in an intended context as per ISO 26262
• Coordinate safety activities (ISO-26262:2 6 & ISO-26262:4 5)
• Responsible for Safety Plan, DIA and component safety timing
• Monitor and control the safety activities according to safety plan and/or DIA 
• Escalate deviation to the safety plan and/or DIA
• Monitor parties and suppliers that deliver the work products on time 
• Get metrics about the status of the safety activities
• Report periodically the status of activities
• Gather safety cases and safety release recommendation
• Impact analysis of processes open points 
• Responsible for the component safety release recommendation
• Contact partner for audit/assessment topics
• Coordinate the audit and confirmation review activities (ISO-26262:2 6) 
• Responsible for safety audit/assessment plan and templates 
• Responsible for analyzing the processes’ open points and providing possible solutions 
•  Perform and review release recommendations 
•  Review requirements for correctness and completeness against input requirements and ISO26262 

 Requirements:

• Degree in Electrical Engineering, Power Electronics, Mechatronics 
•  Experience in der ePowerTrain, HPEV, EMI/EMC 
•  Experience in ISO 26262-Engineering 
•  Experience in quality norms, DOORS-statistics and Audits
• Tools: IBM Rational Doors, HP ALM, Jira, Configuration Management (SVN)  

CHECK BEFORE YOU APPLY :

• Must be eligible to work in UK/EU and no sponsorship will be provided.
• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on jobs@beatmysalary.com  or call us on +44(0)2032898811

• Experience in rotating machinery analysis gas turbine/ steam turbine using ANSYS
• Experience in leading and guiding a team of stress analysts
• The use of latest version of  ANSYS Workbench
• Experience in mechanical vibrations analysis with experience in blisks and blade analysis
• Experience in lifing
• Excellent problem-solving skills
• Excellent written and verbal communications skills
• Good working knowledge of MS Software i.e. Excel, Word, PowerPoint, Project
• Good time management, proactive with an ability to prioritise
• Clear verbal and written communication
• Extensive gas turbine analysis experience – shafts, seals, structures etc.
• Good working knowledge of MS Software i.e. Excel, Word, PowerPoint, Project.
• BE/ ME/ MTech in Mechanical Engineering

Message to candidate

Must be eligible to work in the UK/EU and no sponsorship will be provided.

• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on  Whatsapp on +44 7940272803 or call us on +44(0)2032898811

• Support the customer in change control activities of Mass Properties Department.
• Assist in carrying out Mass Properties Calculation and Vehicle Weight Optimization including the Test & Validation, Weighing of the train.
• Support in the assessment of problem reports and change requests created in PDM metaphase from design and configuration point of view.
• Prepare work packages to execute the change based on decisions made with the customer.
• Co-ordinate with the team for task execution.
• Ensuring all stakeholders are aware and agreed about the scope of changes.

REQUIREMENTS TO PERFORM THE JOB DUTIES

• Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in Mechanical Engineering.
• 5-8 years of experience in Hand Calculations.
• Hands on experience in handling the Weights Management task, including preparation of various reports, testing, weighing of the train.
• Be able to work independently, in reviewing the CDRLs related to Weights department.
• Knowledge of MS Excel, Catia, PDM, and VPM is required.
• Desire for continuous education and training effort.
• Excellent written and verbal communication skills and ability to interact with all levels within and outside of the engineering organization

Must be eligible to work in the UK/EU and no sponsorship will be provided.

• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on  Whatsapp on +44 7940272803 or call us on +44(0)2032898811

Position 1: Designer (SA, LR, A380 and A350 fleets)

1. Good knowledge in wing structure and load paths.
2. Experience in wing repairs – Provide design solutions to in-service damages (accidental and aging).
   1. Preparation of Technical Disposition (TD), repair schemes, and TAS.
3. Sound knowledge in SRM chapters and repair principles.
4. A/ C materials, fastener types and rules.

A/C Design Principles and GD&T, Good knowledge in wing structure and load paths and they are looking for repair specific design engineer at customer front as design is front runner in repairs.

Message to candidate

CHECK BEFORE YOU APPLY :

● Must be eligible to work in the UK/EU and no sponsorship will be provided.

● Proven experience

● No CCJs

● Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on abhinav@beatmysalary.com or Whatsapp on +44 7940272803 or call us on +44(0)2032898811

Job Description / Responsibilities: • Incumbent will take up at end to end Sales/BD responsibilities • Generate new business opportunities in Aerospace Domain • Meets sales growth & financial objectives by forecasting requirements
Desired Skills: •H ands on sales/BD person • Experience in selling in Engineering Services sector in Aerospace Domain. •G o getter with passion for sales •S trong interpersonal, communication skills

CHECK BEFORE YOU APPLY :

• Must be eligible to work in the UK/EU and no sponsorship will be provided.
• Proven experience
• No CCJs

● Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on jobs@beatmysalary.com  or Whatsapp on +44 7940272803 or call us on +44(0)2032898811

Knowledge of key Broadcast concepts – broadcast routing and tally management essentialexperience of NMOS specification – must to haveExperience of developing for broadcast control e.g. BNCS, VSM, Dataminer - desirableExperience of interfacing with RESTful API’s essentialStrong .Net/ C # development experience essentialExperience of C++ development desirableExperience of working in an Agile development environment essentialExperience of utilising a message bus such as RabbitMQ, MQTT essentialExperience of integrating with SQL style databases desirableExperience of integrating with non-SQL databases such as MongoDB, CouchDB etc desirableExperience with containerisation especially Docker desirable

Must be eligible to work in the UK/EU and no sponsorship will be provided.

• Proven experience
• No CCJs
• Fully completed applications

Employer will only accept "completed profile card" of BeatMySalary, so kindly sign-in/sign-up and have a profile card completely filled in before applying to the job using the same.

If you need help with completing your application profile cards, reach out to the team on  Whatsapp on +44 7940272803 or call us on +44(0)2032898811